Using Booklet Print
To use booklet print, you must select either Flip on Short Edge or Flip on Long Edge from the Duplex menu in the
printer properties dialog box and then select Booklet Creation in the Booklet/Poster/Mixed Document dialog box
displayed by clicking the Booklet/Poster/Mixed Document button. From the Duplex menu, you can define the way 2-
sided print pages are bound, and how the printing on the back of the sheet (even-numbered pages) is oriented in relation
to the printing on the front (odd-numbered pages).
When XPS driver is used, booklet print is not available.
Assumes binding along the long edge of the page (left edge for portrait orientation and top edge for
landscape orientation). The following illustration shows long-edge binding for portrait and landscape pages:
Assumes binding along the short edge of the page (top edge for portrait orientation and left edge for
landscape orientation). The following illustration shows short-edge binding for portrait and landscape pages:
Using the Center Output Tray
The center output tray holds up to:
500 sheets (20 lb (75 g/m
Using the Stacker Tray
)) of plain paper