Dell 5130 Color Laser User Manual page 266

Feed paper from the tray loaded with Legal (8.5 x 14 inches).
EX
Feed paper from the tray loaded with Executive (7.25 x 10.5 inches).
MO
Feed paper from the tray loaded with Monarch (3.875 x 7.5 inches).
COM10
Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches).
DL
Feed paper from the tray loaded with DL (110 x 220 mm).
C5
Feed paper from the tray loaded with C5 (162 x 229 mm).
MxNmm
Feed paper from the tray loaded with MxNmm defined by users.
Possible range specified:
Width: 76.2 to 215.9 mm
Length: 127.0 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxNinches defined by users.
Possible range specified:
Width: 3.00 to 8.5 inches
Length: 5.00 to 14.0 inches
If this option is not specified or the tray specified is not available, feed paper from the default tray.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some
cases, this option will be ignored.
-2
Sets printing to 2-column printing.
-r
Rotates the image by 90° and uses the paper in the landscape orientation.
-F
Ignores the form feed code (FF).
-llines
Specifies the number of lines per page.
-wcolumns
Specifies the number of columns per line.
-ooutcolumns
Converts print data to single-byte text and sets printing to start from outcolumns.
-Loutlines
Prints text from the outline columns.
-en
Expands horizontal tabs to n columns (space). The default is 8.
-ssize
Specifies the font size as point size. The default is 10.
-E
This function turns on the image enhancement function. For models without the image enhancement mechanism,
this option will be ignored.