Dell 5130 Color Laser User Manual page 273

Available RGB input profile option value are as follows:
0
sRGB
1
AdobeRGB
This option is available only for color printing and when entry data is RGB data.
-RGBTp=mode
Specifies RGB color temperature.
Available RGB color temperature option value are as follows:
5000
5000K
6000
6000K
9300
9300K
This option is available only for color printing and when entry data is RGB data.
-Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middle:magenta-high:yellow-low:yellow-
middle:yellow high:black-low:black-middle:black-high
Specifies adjustment value for color balance of each color/density.
Available adjustment values are as follows:
+3
Dark 3
+2
Dark 2
+1
Dark 1
0
Normal
-1
Light 1
-2
Light 2
-3
Light 3
-Cb
Option value must be specified in the following order:
Cyan low density, Cyan medium density, Cyan high density, Magenta low density, Magenta medium density,
Magenta high density, Yellow low density, Yellow medium density, Yellow high density, Black low density,
Black medium density, Black high density
If no value is specified, it is treated as "0"(Normal).
For example, if you want to specify "Light 2" for Cyan medium density, "Dark 3" for Yellow high density, and
"Dark 2" for Black low density, it can be specified using either of the following:
-Cb=0:-2:0:0:0:0:0:0:+3:+2:0:0
-Cb=:-2:::::::+3:+2::