Dell 5130 Color Laser User Manual page 188

settings, and configure the security settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To display the printer's firmware version.
Service Tag
Purpose:
To display the printer's service tag.
Paper Density
Purpose:
To specify paper density settings.
Values:
Normal*
Plain
Light
Normal*
Label
Light
Adjust BTR
NOTICE: The print quality changes depending on the setting values you select for this item.
Purpose:
To specify the optimum voltage settings for printing for the transfer roller (BTR). To lower the voltage, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
Values:
Plain
(60 to 90 gsm)
Plain Thick
(80/90 to 105 gsm)
Transparency
Covers
(106 to 163 gsm)
Covers Thick
(164 to 216 gsm)
Label
0*
-6 - +6
0*
-6 - +6
0*
-6 - +6
0*
-6 - +6
0*
-6 - +6
0*