Dell 5130 Color Laser User Manual page 274

-Sl=mode
Specifies staple settings.
Available staple option values are as follows:
0
Off
1
On
This option is available only when the optional output expander is installed.
-Os=mode
Specifies offset settings.
Available offset option values are as follows:
0
Auto
1
Offset per Set (Offsets each copy before printing the next copy.)
2
Offset per Job (Offsets each copy per paper job you specify.)
This option is available only when the optional output expander is installed.
-Lh=mode
Specifies letterhead duplex mode settings.
When letterhead duplex mode is enabled, a print sheet is always fed through duplex feeding path in a printer. As
the result, a user can set sheets without caring about sheet orientation in an input slot.
Available Letterhead duplex mode values are as follows:
0
Off
1
On
2
Auto
-Tr=mode
Specifies trapping settings.
Available trapping option values are as follows:
0
Off
1
On
-Hld=PrintType:UserID:Password:DocumentName
Secure Print
PrintType
secure
Secure Print
private
Private MailBox Print
public
Public MailBox Print
proof
Proof Print
UserID