Dell 5130 Color Laser User Manual page 65

For Windows Server 2008:
a. Open Control Panel.
b. Select Network and Sharing Center.
c. Select Connect to a network.
d. Select dell_device from the network items listed in Connect to a network.
e. Select Connect Anyway in the warning dialog box indicating you are entering an unsecured area.
f. Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008 R2 and Windows 7:
a. Open Control Panel.
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select dell_device from the network items listed in the available network list, and click Connect.
2. Check the IP address assigned by AutoIP on the printer.
a. Press Menu on the printer control panel.
b. Scroll down and select Admin Menu.
c. Scroll down and select Network.
d. Scroll down and select TCP/IP.
e. Scroll down and select IPv4.
f. Scroll down and select IP Address.
(Default IP address range: 169.254.xxx.yyy)
IP Address
169.254.000.041*
3. Check that the IP address on your computer is assigned by DHCP.
4. Open Dell Printer Configuration Web Tool using the WEB browser.