Dell 5130 Color Laser User Manual page 406

Use print media that is not damp.
3
Does this solve your problem?
Fan the print media.
4
Does this solve your problem?
Wipe the separator rollers in the tray where the multi-feed occurred
with a cloth moistened with water.
5
Does this solve your problem?
Replace the separator rollers in the tray where the multi-feed
occurred if you have a spare.
6
Does this solve your problem?
MPF Multi-feed jam
Action
Ensure the media type you are using.
1 If using coated paper, go to action 2.
If using other type of print media, go to action 3.
Use print media that is not damp.
2
Does this solve your problem?
Fan the print media.
3
Does this solve your problem?
Wipe the separator rollers in the MPF with a cloth moistened with water.
4
Does this solve your problem?
Replace the separator rollers in the MPF if you have a spare.
5
Does this solve your problem?
Noise
Action
To specify the cause of the noise, perform the Auto
Registration Adjustment.
1
Does the noise persist?
Replace the belt unit if you have a spare.
1. Replace the belt unit. See
Unit."
2. After you replace the belt unit, start Tool Box.
For how to start Tool Box, see
Your Printer
2
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does this solve your problem?
Replace the fuser if you have a spare.
1. Replace the fuser. See
"Replacing the Belt
"Understanding
Software."
"Replacing the
Yes
Go to action 2.
The task is complete. (The belt unit you are
using has been damaged. Replace it with a new
one.)
Fuser."
The task is
Go to action 4.
complete.
The task is
Go to action 5.
complete.
The task is
Go to action 6.
complete.
The task is
Contact Dell.
complete.
Yes
-
The task is complete. Go to action 3.
The task is complete. Go to action 4.
The task is complete. Go to action 5.
The task is complete. Contact Dell.
No
-
No
Go to
action
3.
Go to
action
4.