8. Close the control board cover and then rotate the screw clockwise.
9. Turn on the printer.
If a message displays telling you to make initial setup on the operator panel, always do as instructed.
10. Print the printer settings page to verify if the optional hard disk is installed correctly by following the instructions.
"Printing Printer Settings
Printing Printer Settings Page
11. When Using the Operator Panel
a. Press Menu button.
b. Ensure Report/List is highlighted, and then press
The printer settings page is printed.
d. Verify if Hard Disk is listed in the printer settings under Printer Options.
If it is not listed, turn off the printer, unplug the power cable, and reinstall the hard disk.
When Using the Dell Printer Configuration Web Tool
a. Launch Dell Printer Configuration Web Tool.
1) Open the web browser.
2) Enter the IP address of your printer in the web browser.
"Dell Printer Configuration Web
b. Select Printer Settings.
(Set) button. Printer Setting is displayed.