Dell 5130 Color Laser User Manual page 287

-Hld=proof:UserID::DocumentName
-Hld=proof:UserID::
NOTICE: Make sure you specify Secure Print only when you directly print data to a printer. Secure Print may not
be available if you specify it when data need to be printed through another server or data need to be handled by
another program such as PostScript files. Collate is automatically specified when you specify Proof Print.
-Jown= jobownername: Password: jobgroupname Authentication Setting
Specifies job owner name, password and job group name for authentication.
When only job owner name is specified (-Jown=jobownername:) (no password specified),
authentication password is treated as not specified.
When only password is specified (-Jown=:password) (no job owner name specified), login user name
is used as job owner name. Entered password is used as authentication password.
When neither of job owner name nor password is specified (-Jown=:), login user name is used as job
owner name, and authentication password is treated as not specified.
When a job owner name exceeds allowable character length, the extra characters are ignored.
When an unacceptable character is entered to specify a job owner name, "UnknownUser" becomes the
job owner name.
NOTE: Alphanumeric characters, including spaces and colons, and symbols can be entered to specify a job owner
name.
NOTE: Up to 32 characters become the job owner name.
When an unacceptable character is entered in a job group name, the job owner name is treated as not
specified.
NOTE: Alphanumeric characters, including spaces and colons, and symbols can be entered to specify a job owner
name.
NOTE: Up to 32 characters can be entered to specify a group name.
When an unacceptable character is entered in a password, or when a specified password is not within
the range of the allowable character length, the authentication password is treated as not specified.
NOTE: Acceptable password length is between 4 and 12 characters.
Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if
authentication setting is made with the environmental variable, it is used as setting information.
Example
To output the displayed screen image to a file using the snapshot command and convert the file into the PostScript
language program using the sunras2ps2 command, type as follows.
% sunras2ps2 file.rs > file.ps
To output the displayed screen image to a file using the snapshot command, convert the file into the PostScript language
program using the sunras2ps2 command and output it to a printer, type as follows.
% sunras2ps2 file.rs | lp
Important
When -s and -S are specified at the same time or when the same option is specified twice, the later setting will
prevail.