To Specify the Password for Authentication Printing:
If you need to specify the password in authentication printing, you can specify the password in the environment
variable as follows.
% setenv JOWN5130P "password"
If you do not specify the password inexplicitly, type as follows.
% setenv JOWN5130P ""
Acceptable password length is between 4 and 12 characters. When an unacceptable character is entered in a
password, or when a specified password is not within the range of the allowable character length, the extra
characters are ignored.
If you specify the filter option when authentication printing is already specified, the filter option has the
higher priority over authentication printing.
If you only specify the password without specifying the user name in the environment variable, the login
name is assumed as the user name.
If you enter the password in the login file for automatically allocating the environment variable when you
log in, you are recommended to specify the appropriate access privilege that prevents unauthorized users from
reading the login file.
/usr/local/dellbin5130/txt2ps2 [-d] [-D] [-Itray-input] [-t] [-2] [-r] [-F] [-llines] [-wcolumns]
[-ooutcolumns] [-Loutlines] [-en] [-ssize] [-E] [-ffont] [-Nc=copies] [-cl] [-ps] [-
mg=up:bottom:right:left] [-Hd=position:format:page] [-Hffont] [-MSI] [-M=type] [-Mfo=mode] [-Pon] [-
St=mode] [-Sp] [-Sb] [-Cm=mode] [-Pr=mode] [-Cc=mode] [-Gc=mode] [-Sc=mode] [-Gg=mode] [-Cb=cyan-
high:black-low:black-middle:black-high] [-Sl=mode] [-Os=mode] [-Lh=mode] [-Tr=mode] [-
Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password:jobgroupname] [filename...]
Reads text, converts it to the PostScript language program, and writes to standard output. If the filename is not specified,
the standard input will be taken as the command input.
By typing character strings in the environmental variable TXT2PS2OPTION, the input of option at the command line can be
At the environmental variable TXT2PS2OPTION and the command line, if no option is specified, the printer will output in 10-
point font size in the portrait orientation.
At the environmental variable TXT2PS2OPTION and the command line, if the same option is specified, the one specified at
the command line will prevail.
txt2ps2 outputs the PostScript language program that adjusts the line/column according to the paper size. For this reason,
the user need not be aware of the paper size. If there is an option to specify the line/column, automatic line feed
according to the paper size will not be executed. Printing will be output according to the line/column specified.
txt2ps2 interprets the following control codes. Other control codes/undefined codes will be converted to octal numbers and
Form feed (modifiable by option)
8-column tab stop (modifiable by option)