paper size settings for the current job.
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no larger paper size, the printer substitutes paper of
Substitutes paper of nearest size.
Substitutes paper from the MPF.
To specify the default measurement unit displayed after the numeric value on the operator panel.
millimeter (mm) Selects millimeter as the default measurement unit.
Selects inch as the default measurement unit.
The default for mm/inch varies depending on other settings, such as Country and Document Size.
Set Available Time
To specify the time period when printing is available.
Off* Does not specify the time period when printing is available.
Specifies the time period when printing is available.
Specifies the start time of the time period when printing is available.
Specifies the end time of the time period when printing is available.
Recurrence Specifies the day of the week to repeat the setting.
To disable or enable data encryption when using the printer.
Encryption Key Sets a key that is required to encrypt.
You can enter only characters from 0 to 9, a to z, A to Z, and NULL values for encryption key.
HDD Overwrite Mode
To select to overwrite the hard disk drive and the number of times you can overwrite the disk.
Disables to encrypt the data.
Enables to encrypt the data.