If the output size option (-s, -S) is not specified, scaling will be executed taking one pixel of the raster data as
one pixel of the printer.
If the print position option specifies a point beyond the printable area of the printer, data beyond the printable area
will not be printed.
/usr/local/dellbin5130/tiff2ps2 [-d] [-D] [-Itray-input] [-t] [-r] [-n] [-l=left,bottom] [-
s=width,height] [-S=width] [-E] [-Nc=copies] [-Cl] [-Hd=position:format] [-Hffont] [-MSI] [-M=type]
[-Mfo=mode] [-Pon] [-St=mode] [-Sp] [-Sb] [-Cm=mode] [-Pr=mode] [-Cc=mode] [-Gc=mode] [-Sc=mode] [-
Gg=mode] [-Ct] [-Br= mode] [-RGBc= mode] [-RGBPr= mode] [-RGBTp= mode] [-Cb=cyan-low:cyan-
low:black-middle:black-high] [-Sl=mode] [-Os=mode] [-Lh=mode] [-Tr=mode] [-
Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password:jobgroupname] [filename...]
Reads TIFF data, converts it to the PostScript language program and writes to standard output. If the filename is not
specified, the standard input will be taken as the command input. TIFF files with a pixel depth of 1, 4, 8, 24, and 32 bits
can be specified.
There are four types of supported compression formats.
Huffman compression (CCITT Group 3 transformed Huffman run length encoding)
Fax-CCITT3 compression (facsimile-compatible CCITT Group 3)
Even in the above compression format, the TIFF file that has multiple images in one file is not supported.
tiff2ps2 takes filename as having been created in 72 dpi and calculates the output size. Thus, to convert TIFF files created
in other resolutions, specify the size option (-s, -S) explicitly for conversion.
Enables the short-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the shorter edge of the pages can be bound.
Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the longer edge of the pages can be bound. This option is available only
when the duplexer is installed on the printer.
Specifies the paper tray.