Dell 5130 Color Laser User Manual page 200

Specified
MPF
Mode
Driver
Specified*
On*
Display
Popup
Off
1
* S2 indicates papers whose one side has been printed already.
NOTE: For the tray 1, optional 550-sheet feeder, or optional 1100-sheet feeder setting paper size is not required.
These trays detect the paper size automatically. For more information on supported paper size for the standard and
optional trays, see
Use this menu item to:
Optimize print quality for the specified paper.
Select paper source through your software program by selecting type and size.
Automatically link trays. The printer automatically links any trays containing the same type and size of paper, if you
have set the Paper Type to the correct values.
Tray 1
Purpose:
To specify the paper loaded in the top tray.
Values:
Plain(60 to 90 gsm)*
Plain Thick (80/90 to 105 gsm)
Transparency
Covers(106 to 163 gsm)
Covers Thick (164 to 216g sm)
Paper Type Label
Coated (106 to 163 gsm)
Coated Thick (164 to 216 gsm)
Envelope
Recycled
Letter Head
Auto*
Monarch
DL
C5
Paper Size Envelope #10
Custom Size
Stop printing and show an error on the operator panel if the paper specified from the printer
driver does not match the paper configured for the MPF from the operator panel.
Continue to print even if the paper specified from the printer driver does not match the paper
configured for the MPF from the operator panel.
Specifies the size and type of paper loaded in the MPF. This item is available only when Panel
Specified is selected for MPF Mode.
Size and type of paper loaded in the MPF is not specified. This item is available only when Panel
Specified is selected for MPF Mode.
"Supported Paper Sizes."
210 mm*/8.3 inch*
X Size
77 - 215 mm/3.0-8.5 inches
297 mm*/11.7 inch*
Y Size
127 - 355 mm/5.0-14.0 inches
Specifies the width of the custom size paper.
Specifies the length of the custom size paper.