Dell 5130 Color Laser User Manual page 195

Font size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
NOTE: The Font Size menu is only displayed for typographic fonts.
See also:
"Pitch and Point Size."
Font Pitch
Purpose:
To specify the font pitch for scalable monospaced fonts.
Values:
10.00*
Specify the value in increments of 0.01.
6.00-24.00
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For nonscalable monospaced fonts,
the pitch is displayed, but cannot be changed.
NOTE: The Font Pitch menu is only displayed for fixed or monospaced fonts.
See also:
"Pitch and Point Size."
Form Line
Purpose:
To set the number of lines in a page.
Values:
1
64*
Specify the value in increments of 1.
5-128
1
* Denotes country-specific factory default values.
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and Orientation
menu items. Select the correct Form Line and Orientation before changing Form Line.
See also:
"Orientation."
Quantity
Purpose:
To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values
selected from the printer driver always override values selected from the operator panel.)
Values:
1*
Specify the value in increments of 1.
1-999
Image Enhancement