9. Rotate the lock levers to secure the inner cover while pressing the cover with the other hand.
10. Close the front cover.
11. Close the right hand cover.
When closing the right hand cover, apply your hand in the vicinity of the handle as shown in the illustration,
and then press the cover firmly toward the printer.
Stand straight in front of the right hand cover and not in front of the front cover, whenever you close the
right hand cover.
Replacing the Transfer Roller
To prevent electric shock, always turn off the printer and disconnect the power cable from
the grounded outlet before performing maintenance.
Before performing any of the following procedures, read and follow the safety instructions in
your Product Information Guide provided with your product.
Video instructions are also available in the Maintenance Guide.
The Maintenance Guide is included in the Drivers and Utilities CD provided with your printer.
Click start® Run, and then type D:\MaintenanceGuide\MaintenanceGuide.exe (where D is the drive letter
of your CD), and then click OK.