To specify whether to perform the image enhancement feature. Image enhancement is a feature that makes the boundary
line between black and white smoother to decrease jagged edges and enhance the visual appearance.
Disables the Image Enhancement feature.
On* Enables the Image Enhancement feature.
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Disable* Disables the Hex Dump feature.
Enables the Hex Dump feature.
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Disable* Does not print in the draft mode.
Prints in the draft mode.
To add the line termination commands.
The line termination command is not added.
CR=CR, LF=LF, FF=FF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print mode.