Determining The Wireless Network Settings - Dell 5130 Color Laser User Manual

The Printer Settings page is printed.
6. Verify that the Network (Wireless) section exists.
NOTE: For more information on configuring the Wireless Adapter see

Determining the Wireless Network Settings

You need to know the wireless network settings to use your printer as a wireless device. For details of the settings,
contact your network administrator.
Wireless SSID
Settings
Network
Type
Security Security
Settings
Transmit
Key
WEP Key Specified the WEP key set used through the wireless network only when
Pass
Phrase
Configuring a Wireless Adapter
This section describes how to configure a wireless adapter through Easy Setup Navigator.
You can select a method to configure a wireless adapter from the following:
Wizard Setup through
Advanced Setup through
1 ®
* WPS-PIN (Wi-Fi Protected setup-Personal Identification Number) is a method to authenticate and register devices
required for wireless configuration, by entering PIN assignments in the printer and computer. This setting, performed
through access point, is available only when the access points of your wireless router supports WPS.
Specifies the name that identifies the wireless network. Up to 32
alphanumeric characters.
Specifies the network type from Ad-hoc or Infrastructure.
Selects the security method from No security, WEP, WPA-PSK TKIP and
WPA2-PSK-AES/WPA-PSK-AES.
Specifies the transmit key from the list.
WEP is selected for Security.
Specifies the pass phrase of alphanumeric characters from 8 to 63 bytes
long only when WPA-PSK is selected for Encryption.
USB connection
Ethernet connection
Operator Panel or Dell Printer Configuration Web Tool
1
WPS-PIN*
2
WPS-PBC*
USB connection
"Configuring a Wireless Adapter."