Dell 5130 Color Laser User Manual page 235

Contact Support
Env. Mode Error
010-910
Open Right Hand Cover
and make a Envelope
Lever the normal
position.
Close Right Hand Cover
016-XXX
Certificate Fail
Init Certificate
Are You Sure?
016-316
Restart Printer
Reseat Memory
Contact Support
016-318
Restart Printer
Reseat Memory
Contact Support
016-338
Restart Printer
Reseat Wireless
Contact Support
Invalid ID
016-383
Data Violation
Press
Range Chk Error
016-384
Data Violation
Press
Header Error
016-385
Data Violation
Press
Check Sum Error
016-386
Data Violation
The printer is in the envelope mode when
you print on plain paper.
Certification error has occurred.
The printer detected an unsupported
memory module in the memory slot.
The memory module is not fully inserted
in the slot.
An error occurred in the wireless adapter.
An error occurred because an
invalid firmware is installed.
In downloading the firmware, the address
of the writing destination is inaccurate.
In downloading the firmware, the header
information of a download file is
inaccurate.
In downloading the firmware, the
checksum of a download file is
inaccurate.
Open the right hand cover, and then lift up the
envelope lever to clear the envelope mode.
See "Loading an Envelope in the
Inquire of your system administrator to re-
configure the security settings.
Contact Dell if this message appears repeatedly.
See "Contacting Dell."
Remove the unsupported memory module. If this
does not solve the problem, contact Dell.
See "Contacting Dell."
Remove the memory module from the slot, and
then reinsert it. If this does not solve the
problem, contact Dell.
See "Contacting Dell."
Turn the printer off and on. Ensure the following:
The wireless adapter is securely inserted in the
slot on the control board.
Unauthorized USB devices are not used.
If this does not solve the problem, contact Dell.
See "Contacting Dell."
Press (Set) button.
Contact Dell if this message appears repeatedly.
See "Contacting Dell."
Press (Set) button.
Contact Dell if this message appears repeatedly.
See "Contacting Dell."
Press (Set) button.
Contact Dell if this message appears repeatedly.
See "Contacting Dell."
Press (Set) button.
Contact Dell if this message appears repeatedly.
MPF."