7. Reconnect all cables including the power cable into the back of the printer and turn on the printer.
Removing the 1100-Sheet Feeder
If you are removing the 1100-sheet feeder, be sure to turn off the printer, unplug the power
cable, and disconnect all cables from the back of the printer before completing these tasks.
1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer.
2. Lock down the brakes of the two casters at the front of the optional 1100- sheet feeder.
Failure to lock the brakes can cause the printer to move unexpectedly, resulting in injury.
For easier and safer locking, make the brakes of the two casters face forward by pushing the 1100-sheet
3. Pull the tray out of the printer until it stops. Hold the tray with both hands, Lift the front of the tray slightly, and
remove it from the printer.