Auger Mark - Dell 5130 Color Laser User Manual

2. After you replace the drum cartridge, start Tool Box.
For how to start Tool Box, see
Printer Software."
2
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the MQ Chart button.
The MQ Chart is printed.
Does this solve your problem?
Replace the fuser if you have a spare.
1. Replace the fuser. See
2. After you replace the fuser, start Tool Box. For how
to start Tool Box, see
Software."
3
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the MQ Chart button.
The MQ Chart is printed.
Does this solve your problem?
Replace the belt unit if you have a spare.
1. Replace the belt unit. See
2. After you replace the belt unit, start Tool Box. For
how to start Tool Box, see
Printer Software."
4
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does this solve your problem?

Auger mark

Action
Check if the print defect falls under the patterns of auger
marks.
1. Start Tool Box. For how to start Tool Box, see
"Understanding Your Printer
The Tool Box opens.
1
2. Select Chart Print from the left list.
3. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does the print defect fall under the patterns of auger
marks?
The toner cartridges may be low or need to be replaced.
Confirm the amount of toner in each toner cartridge.
1. Check the toner level in the Status tab in the Status
2
Monitor.
2. Replace the toner cartridges as necessary.
"Understanding Your
"Replacing the Fuser."
"Understanding Your Printer
"Replacing the Belt
"Understanding Your
Software."
The task is complete. (The drum cartridge you
are using has been damaged. Replace it with a
new one.)
The task is complete. (The fuser you are using
has been damaged. Replace it with a new
one.)
Unit."
The task is complete.
Yes
Go to action 2.
The task is complete.
Contact
Dell.
Contact
Dell.
Contact
Dell.
No
Contact
Dell.
Go to
action
3.