Default Settings - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Sent: 6045 output, 0 rate-limited
Default Settings
Table 47-2
Table 47-2
Parameters
IPv6 processing
Duplicate address detection
attempts
Reachability time
Retransmission time
IPv6-ACLs
Cisco MDS 9000 Family CLI Configuration Guide
47-20
0 echo request, 0 echo reply
734 group query, 0 group report, 0 group reduce
0 router solicit, 528 router advert, 0 redirects
0 neighbor solicit, 2 neighbor advert
unreach: 0 routing, 0 admin, 0 neighbor, 1160 address, 0 port
parameter: 0 error, 0 header, 0 option
0 hopcount expired, 0 reassembly timeout,0 too big
0 echo request, 0 echo reply
0 group query, 1466 group report, 0 group reduce
1 router solicit, 0 router advert, 0 redirects
3412 neighbor solicit, 6 neighbor advert
lists the default settings for IPv6 parameters.
Default IPv6 Parameters
Chapter 47
Default
Disabled.
0 (neighbor discovery disabled).
1000 milliseconds.
30000 milliseconds.
None.
Configuring IPv6 for Gigabit Ethernet Interfaces
OL-18084-01, Cisco MDS NX-OS Release 4.x