Configuring Smtp Server And Ports - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 53 Configuring Call Home
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 4
switch(config-callhome)#
destination-profile CiscoTAC-1 http
https://httpssever.com/Service
Step 5
switch(config-callhome)#
destination-profile test1 http
https://httpssever.com/Service
Any pre-defined or user-defined destination profiles can be configured to enable or disable a particular
transport method. The transport methods are HTTP and email.
To enable or disable transport method for a destination profile, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)#
destination-profile CiscoTAC-1
transport-method
Step 4
switch(config-callhome)# no
destination-profile CiscoTAC-1
transport-method email
Step 5
switch(config-callhome)#
destination-profile full-txt
transport-method http

Configuring SMTP Server and Ports

To configure the SMTP server and port, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# callhome
switch(config-callhome)#
Step 3
switch(config-callhome)# transport
email smtp-server 192.168.1.1
switch(config-callhome)# transport
email smtp-server 192.168.1.1 port 30
OL-18084-01, Cisco MDS NX-OS Release 4.x
Purpose
Optional. Configures the predefined CiscoTAC-1 profile
with a HTTPS URL address.
The Call Home messge in xml format is uploaded at the
configured HTTPS URL address.
Optional. Configures the user-defined destination profile
with a HTTPS URL address.
The Call Home messge in the configured format is
uploaded at the configured HTTPS URL address.
Purpose
Enters configuration mode.
Enters Call Home configuration submode.
Optional. Enables predefined destination profile
CiscoTAC-1 for http transport-method.
http
Note
Optional. Disables predefined destination profile
CiscoTAC-1 for email transport-method.
Optional. Enables predefined full-txt-destination profile
for HTTP transport method.
Purpose
Enters configuration mode.
Enters Call Home configuration submode.
Configures the DNS, IPv4 address, or IPv6 address of the
SMTP server to reach the server. The port usage defaults
to 25 if no port is specified.
Note
For user-defined destination profiles, e-mail is
the default. You can enable either or both
transport mechanisms. If you disable both
methods, e-mail will be enabled.
The port number is optional and, if required, may
be changed depending on the server location.
Cisco MDS 9000 Family CLI Configuration Guide
E-Mail Options
53-15