Appendix; Sample Lan Configurations; Introduction; Sample Configuration For Cisco Catalyst 5500 A - Cisco PGW 2200 Software Installation And Configuration Manual

Sample LAN Configurations

Revised: February 21, 2012, OL-18083-14

Introduction

This appendix contains sample configurations for two LAN switches, Cisco Catalyst 5500 A and Cisco
Catalyst 5500 B, and the route switch modules.

Sample Configuration for Cisco Catalyst 5500 A

To view the current configuration of the Cisco Catalyst 5500 A, type the following command in
privileged mode, and press Enter:
Catalyst_5513A (enable) show config
Output similar to the following appears:
begin
!
#version 4.5(1)
!
set password $1$l30o$QUt/nAlYZH/WFmDoJqWAW0
set enablepass $1$tTCB$rbEX8KRDTtpVG9gsy7jc61
set prompt Catalyst_5513A
set length 24 default
set logout 20
set banner motd ^C^C
!
#system
set system baud
set system modem disable
set system name
set system location Lab1
set system contact
!
#snmp
set snmp community read-only
set snmp community read-write
set snmp community read-write-all public
set snmp rmon disable
set snmp trap enable
set snmp trap enable
OL-18083-14
9600
Catalyst_5513A
Jim Smith 913 555-7998
public
private
module
chassis
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
A P P E N D I X
F
F-1