Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 1237

Chapter 50 Configuring RMON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 1
switch# config t
Step 2
switch(config)# rmon event 2 log trap
eventtrap description CriticalErrors
owner Test2
switch(config)# no rmon event 5
OL-18084-01, Cisco MDS NX-OS Release 4.x
Purpose
Enters configuration mode.
Creates RMON event number 2 to define
CriticalErrors and generates a log entry when the
event is triggered by the alarm. The user Test2 owns
the row that is created in the event table by this
command. This example also generates an SNMP trap
when the event is triggered.
Deletes an entry from the RMON event table.
Cisco MDS 9000 Family CLI Configuration Guide
Configuring RMON
50-3