Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 1115

Chapter 43 Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Step 11 Activate the zone set.
switch(config)# zoneset activate name zoneset-iscsi vsan 1
Display the active zone set.
Step 12
Note
switch# show zoneset active
zoneset name zoneset-iscsi vsan 1
zone name iscsi-zone-1 vsan 1
* fcid 0x6d0001 [pwwn 21:00:00:20:37:6f:fd:97]
zone name iscsi-zone-2 vsan 1
* fcid 0x6d0101 [pwwn 21:00:00:20:37:6f:fe:54]
* fcid 0x6d0201 [pwwn 21:00:00:20:37:a6:a6:5d]
Bring up the iSCSI hosts (host 1 and host 2).
Step 13
Show all the iSCSI sessions (use the detail option for detailed information).
Step 14
switch# show iscsi session
Session #1
Note
Session #2
Initiator 10.11.1.10 <-----------------------------------Host 1
Initiator name iqn.1987-05.com.cisco:01.e41695d16b1a
Session #1
OL-18084-01, Cisco MDS NX-OS Release 4.x
The iSCSI hosts are not connected so they do not have an FC ID yet.
symbolic-nodename 10.11.1.10
symbolic-nodename iqn.1987-05.com.cisco:01.25589167f74c
Initiator iqn.1987-05.com.cisco:01.25589167f74c <-----Host 2
Initiator ip addr (s): 10.15.1.11
Target iqn.1987-05.com.cisco:05.172.22.92.166.07-05.21000020376ffe54
The last part of the auto-created target name is the Fibre Channel target's pWWN.
VSAN 1, ISID 00023d000001, Status active, no reservation
Target iqn.1987-05.com.cisco:05.172.22.92.166.07-05.2100002037a6a65d
VSAN 1, ISID 00023d000001, Status active, no reservation
Target iqn.1987-05.com.cisco:05.172.22.92.166.07-01.21000020376ffd97
VSAN 1, ISID 00023d000001, Status active, no reservation
iSCSI Authentication Setup Guidelines and Scenarios
<-----------Target
<--------------------------------- iSCSI host (host 1, not online)
<------------Target
<------------Target
Cisco MDS 9000 Family CLI Configuration Guide
<-iSCSI host (host 2, not online)
43-71