Scsi Flow Manager - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

SCSI Flow Services
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 48-1
The SCSI target and initiator must be connected to different SSMs on different switches.
Note
For statistics monitoring, the target device is not required to be connected to an SSM.
Note

SCSI Flow Manager

The SCSI flow manager (SFM) resides on a supervisor module and handles the configuration of SCSI
flows, validating them and relaying configuration information to the appropriate SSM. It also handles
any dynamic changes to the status of the SCSI flow due to external events. The SFM registers events
resulting from operations, such as port up or down, VSAN suspension, and zoning that affects the SCSI
flow status, and updates the flow status and configuration accordingly.
The SFM on the initiator communicates to its peer on the target side using Cisco Fabric Services (CFS).
Peer communication allows the initiator SFM to validate target parameters and program information on
the target side.
Cisco MDS 9000 Family CLI Configuration Guide
48-2
SCSI Flow Services Functional Architecture
Supervisor
SCSI flow CLI
SCSI flow
manager
SSM
SCSI flow
CPP
client
DDP DPP
Initiator
Chapter 48
Supervisor
CFS
SSM
Ports
Configuring SCSI Flow Services and Statistics
SCSI flow CLI
SCSI flow
manager
SCSI flow
CPP
client
DDP DPP
Target
OL-18084-01, Cisco MDS NX-OS Release 4.x
Ports