System Message Logging Configuration - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 52 Configuring System Message Logging
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 52-1
Facility Keyword
vshd
wwn
xbar
zone
Table 52-2
Table 52-2
Level Keyword
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
Refer to the Cisco MDS 9000 Family System Messages Reference for details on the error log message
Note
format.

System Message Logging Configuration

System logging messages are sent to the console based on the default (or configured) logging facility
and severity values.
This sections includes the following topics:
•
•
•
•
•
•
•
OL-18084-01, Cisco MDS NX-OS Release 4.x
Internal Logging Facilities (continued)
Description
vshd
WWN manager
Xbar system messages
Zone server
describes the severity levels supported by the system message logs.
Error Message Severity Levels
Level
0
1
2
3
4
5
6
7
Message Logging Initiation, page 52-4
Console Severity Level, page 52-4
Monitor Severity Level, page 52-4
Module Logging, page 52-5
Facility Severity Levels, page 52-5
Log Files, page 52-6
System Message Logging Servers, page 52-6
Description
System unusable
Immediate action needed
Critical conditions
Error conditions
Warning conditions
Normal but significant condition
Informational messages only
Debugging messages
Cisco MDS 9000 Family CLI Configuration Guide
System Message Logging Configuration
Standard or Cisco MDS Specific
Cisco MDS 9000 Family specific
Cisco MDS 9000 Family specific
Cisco MDS 9000 Family specific
Cisco MDS 9000 Family specific
System Message Definition
LOG_EMERG
LOG_ALERT
LOG_CRIT
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG
52-3