Clearing The Scheduler Log File; Verifying The Scheduler Configuration - Cisco Nexus 7000 Series Configuration Manual

Clearing the Scheduler Log File

Step 6
Step 7
Step 8
Step 9
Clearing the Scheduler Log File
You can clear the scheduler log file.
Procedure
Step 1
Step 2

Verifying the Scheduler Configuration

To display the scheduler configuration information, perform one of the following tasks:
Command
show scheduler config
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
170
Command or Action
switch(config-schedule)# time
monthly [[dm:]HH:]MM
switch(config-schedule)# time start
{now repeat repeat-interval |
delta-time [repeat repeat-interval]}
switch(config)# show scheduler
config
switch(config)# copy
running-config startup-config
Command or Action
switch# configure terminal
switch(config)# clear scheduler logfile
Purpose
Indicates the job starts on a specified day each month (dm).
If you specify either 29, 30, or 31, the job is started on the
last day of each month.
Indicates the job starts periodically.
The start-time format is [[[[yyyy:]mmm:]dd:]HH]:MM.
• delta-time—Specifies the amount of time to wait after
the schedule is configured before starting a job.
• now—Specifies that the job starts now.
• repeat repeat-interval—Specifies the frequency at
which the job is repeated.
In this example, the job starts immediately and repeats
every 48 hours.
(Optional)
Displays the scheduler configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Clears the scheduler log file.
Purpose
Displays the scheduler configuration.
Configuring the Scheduler