Deleting The Fabric Binding Database; Verifying Fabric Binding Information - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Deleting the Fabric Binding Database

Deleting the Fabric Binding Database
Use the no fabric-binding command in configuration mode to delete the configured database for a specified
VSAN.
switch(config)# no fabric-binding database vsan 10

Verifying Fabric Binding Information

To display fabric binding information, perform one of the following tasks
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
The following example displays the active fabric binding information for VSAN 4:
switch# show fabric-binding database active vsan 4
The following example displays fabric binding violations:
switch# show fabric-binding violations
-------------------------------------------------------------------------------
VSAN Switch WWN [domain]
-------------------------------------------------------------------------------
2
3
4
Note In VSAN 3, the sWWN was not found in the list. In VSAN 2, the sWWN was found in the list, but has a
domain ID mismatch.
The following example displays EFMD Statistics for VSAN 4:
switch# show fabric-binding efmd statistics vsan 4
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
658
Command or Action
switch# show fabric-binding database
[active]
switch# show fabric-binding database
[active] [vsan vsan-id]
switch# show fabric-binding statistics
switch# show fabric-binding status
switch# show fabric-binding violations
switch# show fabric-binding efmd [vsan
vsan-id]
20:00:00:05:30:00:4a:1e [0xeb] Nov 25 05:46:14 2003
20:00:00:05:30:00:4a:1e [*] Nov 25 05:44:58 2003
20:00:00:05:30:00:4a:1e [*] Nov 25 05:46:25 2003
Purpose
Displays the configured fabric binding database.
Include keyword active to display only the active
fabric binding database.
Displays the configured fabric binding database
for the specified VSAN.
Displays statistics for the fabric binding database.
Displays fabric binding status for all VSANs.
Displays fabric binding violations.
Displays the configured fabric binding database
for the specified VSAN.
Last-Time [Repeat count] Reason
Configuring Fabric Binding
[2] Domain mismatch
[2] sWWN not found
[1] Database mismatch
OL-16597-01