Verifying A Session; Committing A Session; Saving A Session; Discarding A Session - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Session Manager

Verifying a Session

To verify a session, use the following command in session mode:
Command
switch(config-s)# verify [verbose]

Committing a Session

To commit a session, use the following command in session mode:
Command
switch(config-s)# commit [verbose]

Saving a Session

To save a session, use the following command in session mode:
Command
switch(config-s)# save location

Discarding a Session

To discard a session, use the following command in session mode:
Command
switch(config-s)# abort

Session Manager Example Configuration

This example shows how to create a configuration session for ACLs:
switch# configure session name test2
switch(config-s)# ip access-list acl2
switch(config-s-acl)# permit tcp any any
switch(config-s-acl)# exit
switch(config-s)# interface Ethernet 1/4
switch(config-s-ip)# ip port access-group acl2 in
switch(config-s-ip)# exit
switch(config-s)# verify
switch(config-s)# exit
switch# show configuration session test2

Verifying Session Manager Configuration

To verify Session Manager configuration information, use the following commands:
OL-16597-01
Purpose
Verifies the commands in the configuration session.
Purpose
Commits the commands in the configuration session.
Purpose
(Optional) Saves the session to a file. The location
can be in bootflash or volatile.
Purpose
Discards the configuration session without applying
the commands.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Verifying a Session
327