Manually Monitoring Tacacs+ Servers Or Groups; Disabling Tacacs - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Manually Monitoring TACACS+ Servers or Groups

Step 3
Step 4
Step 5
Manually Monitoring TACACS+ Servers or Groups
To manually issue a test message to a TACACS+ server or to a server group, perform this task:
Procedure
Step 1
Step 2
The following example shows how to manually issue a test message:
switch# test aaa server tacacs+ 10.10.1.1 user1 Ur2Gd2BH
switch# test aaa group TacGroup user2 As3He3CI

Disabling TACACS+

You can disable TACACS+.
When you disable TACACS+, all related configurations are automatically discarded.
Caution
To disable TACACS+, perform this task:
Procedure
Step 1
Step 2
Step 3
Step 4
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
266
Command or Action
switch(config)# exit
switch# show tacacs-server
switch# copy running-config
startup-config
Command or Action
switch# test aaa server tacacs+ {ipv4-address |
ipv6-address | host-name} [vrf vrf-name]
username password
switch# test aaa group group-name username
password
Command or Action
switch# configure terminal
switch(config)# no feature tacacs+
switch(config)# exit
switch# copy running-config
startup-config
About Configuring TACACS+
Purpose
Exits configuration mode.
(Optional)
Displays the TACACS+ server configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Sends a test message to a TACACS+ server
to confirm availability.
Sends a test message to a TACACS+ server
group to confirm availability.
Purpose
Enters configuration mode.
Disables TACACS+.
Exits configuration mode.
(Optional)
Copies the running configuration to the
startup configuration.
OL-16597-01