Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 638

Default FSPF Settings
Parameters
Hello interval
Dead interval
Distribution tree information
Routing table
Load balancing
In-order delivery
Drop latency
Static route cost
Remote destination switch
Multicast routing
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
592
Configuring Fibre Channel Routing Services and Protocols
Default
20 seconds.
80 seconds.
Derived from the principal switch (root node).
FSPF stores up to 16 equal cost paths to a given
destination.
Based on destination ID and source ID on different,
equal cost paths.
Disabled.
Disabled.
If the cost (metric) of the route is not specified, the
default is 10.
If the remote destination switch is not specified, the
default is direct.
Uses the principal switch to compute the multicast
tree.
OL-16597-01