Example Configuration For Vacl; Default Acl Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Example Configuration for VACL

Example Configuration for VACL
This example shows how to configure a VACL to forward traffic permitted by an IP ACL named acl-ip-01
and how to apply the VACL to VLANs 50 through 82:
switch# configure terminal
switch(config)# vlan access-map acl-ip-map
switch(config-access-map)# match ip address acl-ip-01
switch(config-access-map)# action forward
switch(config-access-map)# exit
switch(config)# vlan filter acl-ip-map vlan-list 50-82

Default ACL Settings

The following table lists the default settings for IP ACLs parameters.
Table 29: Default IP ACLs Parameters
Parameters
IP ACLs
ACL rules
The following table lists the default settings for MAC ACLs parameters.
Table 30: Default MAC ACLs Parameters
Parameters
MAC ACLs
ACL rules
The following table lists the default settings for VACL parameters.
Table 31: Default VACL Parameters
Parameters
VACLs
ACL rules
OL-16597-01
Displaying and Clearing VACL Statistics
Default
No IP ACLs exist by default.
Implicit rules apply to all ACLs .
Default
No MAC ACLs exist by default.
Implicit rules apply to all ACLs .
Default
No IP ACLs exist by default.
Implicit rules apply to all ACLs.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
295