Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 495

Verifying QoS Configuration
This example shows how to display the class maps defined on the switch:
switch# show class-map
Type qos class-maps
===================
class-map type qos c1
class-map type qos c2
class-map type qos c3
class-map type qos c4
class-map type qos class-fcoe
class-map type qos class-default
class-map type qos class-ip-multicast
Type queuing class-maps
=======================
class-map type queuing c1
class-map type queuing c2
class-map type queuing c3
class-map type queuing class-fcoe
class-map type queuing class-default
Type network-qos class-maps
==============================
class-map type network-qos c1
class-map type network-qos c2
class-map type network-qos c3
class-map type network-qos c4
class-map type network-qos class-fcoe
OL-16597-01
match cos 0,7
match protocol ldp
match ip rtp 2000-65535
match dscp 10,12
match precedence 6-7
match protocol dhcp
match protocol arp
match cos 2,4-6
match access-group name ipv4
match cos 3
match any
match ip multicast
match qos-group 2
match qos-group 3
match qos-group 4
match qos-group 1
match qos-group 0
match qos-group 2
match qos-group 3
match qos-group 4
match qos-group 5
match qos-group 1
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Configuring Link-Level Flow Control
449