Verifying Fcoe Configuration - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Interface LLDP Commands
This example shows how to set an interface to transmit LLDP packets:
switch# configure terminal
switch(config)# interface ethernet 1/2
switch(config-if)# lldp transmit
This example shows how to configure an interface to disable LLDP:
switch# configure terminal
switch(config)# interface ethernet 1/2
switch(config-if)# no lldp transmit
switch(config-if)# no lldp receive

Verifying FCoE Configuration

To verify FCoE configuration information, perform one of these tasks:
Command
switch# show fcoe
switch# show fcoe database
switch# show interface [interface number] fcoe
switch# show lldp
This example shows how to verify that the FCoE capability is enabled:
switch# show fcoe
Global FCF details
This example shows how to display the FCoE database:
switch# show fcoe database
-------------------------------------------------------------------------------
INTERFACE
-------------------------------------------------------------------------------
vfc3
This example shows how to display the FCoE settings for an interface.
switch# show interface ethernet 1/37 fcoe
Ethernet1/37 is FCoE UP
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
408
Command or Action
FCF-MAC is 00:0d:ec:6d:95:00
FC-MAP is 0e:fc:00
FCF Priority is 128
FKA Advertisement period for FCF is 8 seconds
FCID
0x490100
vfc3 is Up
FCID is 0x490100
PWWN is 21:00:00:1b:32:0a:e7:b8
MAC addr is 00:c0:dd:0e:5f:76
Purpose
Purpose
Displays whether FCoE is enabled on the switch.
Displays the contents of the FCoE database.
Displays the FCoE settings for an interface or all
interfaces.
Displays LLDP configuration.
PORT NAME
21:00:00:1b:32:0a:e7:b8 00:c0:dd:0e:5f:76
Verifying FCoE Configuration
MAC ADDRESS
OL-16597-01