About Fctimer Distribution; Enabling Or Disabling Fctimer Distribution; Committing Fctimer Changes - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Cli software configuration guide
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Advanced Fibre Channel Features and Concepts

About fctimer Distribution

You can enable per-VSAN fctimer fabric distribution for all Cisco SAN switches in the fabric. When you
perform fctimer configurations, and distribution is enabled, that configuration is distributed to all the switches
in the fabric.
You automatically acquire a fabric-wide lock when you enter the first configuration command after you
enabled distribution in a switch. The fctimer application uses the effective and pending database model to
store or commit the commands based on your configuration.
Related Topics

Enabling or Disabling fctimer Distribution

To enable or disable fctimer fabric distribution, perform this task:
Procedure
Step 1
Step 2
Step 3

Committing fctimer Changes

When you commit the fctimer configuration changes, the effective database is overwritten by the configuration
changes in the pending database and all the switches in the fabric receive the same configuration. When you
commit the fctimer configuration changes without implementing the session feature, the fctimer configurations
are distributed to all the switches in the physical fabric.
To commit the fctimer configuration changes, perform this task:
Procedure
Step 1
Step 2
OL-16597-01
Using Cisco Fabric Services, page 299
Command or Action
switch# configuration terminal
switch(config)# fctimer distribute
switch(config)# no fctimer
distribute
Command or Action
switch# configuration terminal
switch(config)# fctimer commit
Purpose
Enters configuration mode.
Enables fctimer configuration distribution to all switches
in the fabric. Acquires a fabric lock and stores all future
configuration changes in the pending database.
Disables (default) fctimer configuration distribution to
all switches in the fabric.
Purpose
Enters configuration mode.
Distributes the fctimer configuration changes to all
switches in the fabric and releases the lock. Overwrites
the effective database with the changes made to the
pending database.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
About fctimer Distribution
609

Advertisement

Table of Contents
loading

Table of Contents