Discarding The Rscn Timer Configuration Changes; Clearing A Locked Session; Displaying Rscn Configuration Distribution Information - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Discarding the RSCN Timer Configuration Changes

Procedure
Step 1
Step 2
Discarding the RSCN Timer Configuration Changes
If you discard (abort) the changes made to the pending database, the configuration database remains unaffected
and the lock is released.
To discard RSCN timer configuration changes, perform this task:
Procedure
Step 1
Step 2

Clearing a Locked Session

If you have changed the RSCN timer configuration and have forgotten to release the lock by either committing
or discarding the changes, an administrator can release the lock from any switch in the fabric. If the administrator
performs this task, your changes to the pending database are discarded and the fabric lock is released.
The pending database is only available in the volatile directory and are subject to being discarded if the switch
is restarted.
To use administrative privileges and release a locked DPVM session, use the clear rscn session vsan command
in EXEC mode. The following example shows how to clear the RSCN session for VSAN 10:
switch# clear rscn session vsan 10

Displaying RSCN Configuration Distribution Information

The following example shows how to display the registration status for RSCN configuration distribution:
switch# show cfs application name rscn
Enabled
Timeout
Merge Capable
Scope
Note A merge failure results when the RSCN timer values are different on the merging fabrics.
The following example shows how to display the set of configuration commands that would take effect when
you commit the configuration:
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
600
Command or Action
switch# configuration terminal
switch(config)# rscn commit vsan timeout
Command or Action
switch# configuration terminal
switch(config)# rscn abort vsan timeout
: Yes
: 5s
: Yes
: Logical
Managing FLOGI, Name Server, FDMI, and RSCN Databases
Purpose
Enters configuration mode.
Commits the RSCN timer changes.
Purpose
Enters configuration mode.
Discards the RSCN timer changes and clears the
pending configuration database.
OL-16597-01