Modifying A Destination Profile - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Modifying a Destination Profile

Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
This example shows how to create a destination profile for Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# destination-profile Noc101 format full-text
Modifying a Destination Profile
You can modify the following attributes for a predefined or user-defined destination profile:
• Destination address—The actual address, pertinent to the transport mechanism, to which the alert should
• Message formatting—The message format used for sending the alert (full text, short text, or XML).
• Message level—The Call Home message severity level for this destination profile.
• Message size—The allowed length of a Call Home message sent to the e-mail addresses in this destination
You cannot modify or delete the CiscoTAC-1 destination profile.
Note
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
356
Command or Action
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# destination-profile
{ciscoTAC-1 {alert-group group | email-addr address
| http URL | transport-method {email | http}} |
profile-name {alert-group group | email-addr address
| format {XML | full-txt | short-txt} | http URL |
message-level level | message-size size |
transport-method {email | http}} | full-txt-destination
{alert-group group | email-addr address | http URL |
message-level level | message-size size |
transport-method {email | http}} |
short-txt-destination {alert-group group | email-addr
address | http URL | message-level level | message-size
size | transport-method {email | http}}}
switch# show callhome destination-profile [profile
name]
switch# copy running-config startup-config
be sent.
profile.
Configuring Smart Call Home
Purpose
Enters configuration mode.
Enters callhome configuration mode.
Creates a new destination profile and sets
the message format for the profile. The
profile-name can be any alphanumeric
string up to 31 characters.
For further details about this command,
see the Cisco Nexus 5000 Series
Command Reference.
(Optional)
Displays information about one or more
destination profiles.
(Optional)
Saves this configuration change.
OL-16597-01