Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 463

Mapping VSANs to VLANs Example Configuration
Step 2 Create a virtual Fibre Channel interface and bind it to a physical Ethernet interface.
switch(config)# interface vfc 4
switch(config-if)# bind interface ethernet 1/4
switch(config-if)# exit
Step 3 Enable the associated VLAN and map the VLAN to a VSAN.
switch(config)# vlan 200
switch(config-vlan)# fcoe vsan 2
switch(config-vlan)# exit
Step 4 Associate the virtual Fibre Channel interface to the VSAN.
switch(config)# vsan database
switch(config-vsan)# vsan 2 interface vfc 4
switch(config-vsan)# exit
OL-16597-01
Associating a Virtual Fibre Channel Interface to a VSAN
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
417