Discarding Fctimer Changes; Fabric Lock Override; Fabric Database Merge Guidelines - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Cli software configuration guide

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Discarding fctimer Changes

After making the configuration changes, you can choose to discard the changes by discarding the changes

instead of committing them. In either case, the lock is released.

To discard the fctimer configuration changes, perform this task:

If you have performed a fctimer fabric task and have forgotten to release the lock by either committing or

discarding the changes, an administrator can release the lock from any switch in the fabric. If the administrator

performs this task, your changes to the pending database are discarded and the fabric lock is released.

The changes are only available in the volatile directory and are subject to being discarded if the switch is

To use administrative privileges and release a locked fctimer session, use the clear fctimer session command.

switch# clear fctimer session

When merging two fabrics, follow these guidelines:

• Be aware of the following merge conditions:

• Do not configure global timer values when distribution is enabled.

The number of pending fctimer configuration operations cannot be more than 15. After 15 operations,

you must commit or abort the pending configurations before performing any more operations.

Table of Contents

Do you have a question about the AP775A - Nexus Converged Network Switch 5010 and is the answer not in the manual?