Verifying Traffic Storm Control Configuration
Command
switch# show running-config interface
Traffic Storm Control Example Configuration
The following example shows how to configure traffic storm control:
switch# configure terminal
switch(config)# interface ethernet 1/4
switch(config-if)# storm-control broadcast level 40
switch(config-if)# storm-control multicast level 40
switch(config-if)# storm-control unicast level 40
Default Traffic Storm Settings
The following table lists the default settings for traffic storm control parameters.
Table 20: Default Traffic Storm Control Parameters
Parameters
Traffic storm control
Threshold percentage
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
224
Traffic Storm Control Example Configuration
Purpose
Displays the traffic storm control configuration.
Default
Disabled
100
OL-16597-01