Modifying A Destination Profile - Cisco Nexus 3548 Configuration Manual

Modifying a Destination Profile

Step 2
Step 3
Step 4
Step 5
The following example shows how to create a destination profile for Smart Call Home:
switch# configuration terminal
switch(config)# callhome
switch(config-callhome)# destination-profile Noc101 format full-text
Modifying a Destination Profile
You can modify the following attributes for a predefined or user-defined destination profile:
• Destination address—The actual address, pertinent to the transport mechanism, to which the alert should
• Message formatting—The message format used for sending the alert (full text, short text, or XML).
• Message level—The Call Home message severity level for this destination profile.
• Message size—The allowed length of a Call Home message sent to the e-mail addresses in this destination
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 6.x
96
Command or Action
switch(config)# callhome
switch(config-callhome)# destination-profile
{ciscoTAC-1 {alert-group group | email-addr
address | http URL | transport-method {email |
http}} | profilename {alert-group group | email-addr
address | format {XML | full-txt | short-txt} | http For further details about this command, see
URL | message-level level | message-size size |
transport-method {email | http}} |
full-txt-destination {alert-group group | email-addr
address | http URL | message-level level |
message-size size | transport-method {email | http}}
| short-txt-destination {alert-group group |
email-addr address | http URL | message-level level
| message-size size | transport-method {email |
http}}}
switch# show callhome destination-profile [profile
name]
switch(config)# copy running-config startup-config
be sent.
profile.
Configuring Smart Call Home
Purpose
Enters Smart Call Home configuration
mode.
Creates a new destination profile and sets
the message format for the profile. The
profile-name can be any alphanumeric string
up to 31 characters.
the command reference for your platform.
(Optional)
Displays information about one or more
destination profiles.
(Optional)
Saves the change persistently through
reboots and restarts by copying the running
configuration to the startup configuration.