Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 307

To turn Safe Zone on while in interopmode 2:
To disable interoperability mode on a disabled switch:
To enable McDATA Open Fabric mode on a disabled switch:
See Also cfgMcdtMode, cfgSaveActiveToDefined
Fabric OS Command Reference
53-1000599-02
switch:admin> interopMode 2 -s 1
InteropMode: McDATA Fabric
Default Zone: Off
Safe Zone: On
switch:admin> interopmode O
Interop mode is disabled
The switch effective configuration will be lost.
The system will reboot to allow the change to take effect.
Do you want to continue? (yes, y, no, n): [no] y
switch:admin> interopmode 3
McDATA Open Fabric mode is enabled
The switch effective configuration will be lost.
The system will reboot to allow the change to take effect.
Do you want to continue? (yes, y, no, n): [no]y
The configuration is being saved - a system reboot will
cause the change to take effect.
Please disable switch before changing the interop mode.
2
interopMode
281