fanEnable
Enables a fan unit.
Synopsis
fanenable unit
Description
Use this command to set a previously disabled fan unit back to the default RPM speed.
Notes
This command is not available on non-bladed systems except for the Brocade 4100 and 4900.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands
This command has the following operand:
unit
Examples
To enable a fan unit:
See Also
fanDisable, fanShow
Fabric OS Command Reference
53-1000599-02
Specify the fan unit number to enable.
switch:admin> fanenable 1
Fan unit 1 has been enabled
2
fanEnable
141