fwAlarmsFilterSet
Enables or disables alarms for Fabric Watch.
Synopsis
fwalarmsfilterset [mode]
Description
Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all
non-environment class alarms are suppressed. By turning on the alarms, all class alarms are
generated.
Notes
This command requires a Fabric Watch license.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands
This command has the following operand:
mode
Examples
To enable alarms in Fabric Watch:
See Also
fwAlarmsFilterShow
Fabric OS Command Reference
53-1000599-02
Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is
specified, the default value is 0 (alarms deactivated). This operand is
optional.
switch:admin> fwalarmsfilterset
FW: Alarms are already disabled
switch:admin> fwalarmsfilterset 1
FW: Alarms are already enabled
2
fwAlarmsFilterSet
225