Secstatsreset - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

Brocade fabric os command reference guide v6.1.0 (53-1000599-02, june 2008)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

secStatsReset

Resets one or all security statistics to 0.

secstatsreset [name][," domain[;domain]"]

Use this command to reset one or all security statistics to 0. This command can be issued on any

switch to reset the security statistics on the local switch or chassis. If FCS policy is enabled and

secStatsReset is issued on the primary FCS switch, this command can reset security statistics for

any or all switches in the fabric.

The execution of this command is subject to Admin Domain restrictions that may be in place. Refer

to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"

for details.

When invoked without operands, this command displays the security statistics on the local switch

or chassis. The following operands are optional:

Specify the name of a security statistic you would like to reset. The specified

policy name must be capitalized. If executed on the primary FCS, specify an

asterisk (*) to reset all security policies. Valid values for this operand are:

TELNET_POLICY

RSNMP_POLICY

WSNMP_POLICY

SERIAL_POLICY

FRONTPANEL_POLICY

INVALID_SIGN

INVALID_CERT

SLAP_BAD_PKT

Fabric OS Command Reference

53-1000599-02