Supportshowcfgenable - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

supportShowCfgEnable

supportShowCfgEnable
Enables a group of commands to be displayed under the supportShow command.
Synopsis supportshowcfgenable os | exception | port | fabric | services | security | network | portlog |
system | extend | filter | perfmon | ficon | iswitch | asic_db
Description Use this command to enable a group of commands to be displayed under the supportShow
command. Use the supportShowCfgDisable command to disable groups of commands.
Refer to Chapter 6, "supportShow Reference", for more information.
Note The execution of this command is subject to Admin Domain restrictions that may be in place.Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operands:
os
exception
port
fabric
services
security
network
portlog
system
extend
filter
perfmon
ficon
iswitch
asic_db
iscsi
Examples To enable a group of commands under the supportShow command:
See Also supportShow, supportShowCfgDisable, supportShowCfgShow
632
Enables the OS group commands.
Enables the exception group commands.
Enables the port group commands.
Enables the fabric group commands.
Enables the service group commands.
Enables the security group commands.
Enables the network group commands.
Enables the portlog group commands.
Enables the system group commands.
Enables the extend group commands.
Enables the filter group commands.
Enables the Performance Monitor group commands.
Enables the FICON group commands.
Enables the FC Router group commands.
Enables the ASIC DB group commands.
Enables the ISCSI group commands.
switch:admin> supportshowcfgenable os
Config update Succeeded
Fabric OS Command Reference
53-1000599-02