Configshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

configShow

Displays system configuration settings.
Synopsis configshow ["pattern"] | -pattern ["pattern"]
configshow -local|-USB|-U [file] [-pattern "pattern"]
Description Use this command to display some system configuration settings in addition to the parameters set
by the configure command. When executed without operands, this command displays all system
configuration settings.
Notes Not all values displayed are applicable to all system models and configurations.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands The following operands are optional:
"pattern" | -pattern ["pattern"]
-local [file]
-USB | -U [file]
Examples To list the configuration file:
To display the contents of the configuration file:
Fabric OS Command Reference
53-1000599-02
Specify a text string in quotation marks that limits the output of the command
to only those entries that contain the pattern. Use of wildcards and other
common regular expression operators is not supported. Some configuration
settings do not display when filtered. If in doubt, use the command without
operands.
Displays the entire contents of a configuration file that was previously created
by configUpload and stored on the chassis. The output can be optionally
filtered by -pattern "pattern". If file is omitted, the command prompts you to
specify a file name. The output format when -local is specified matches that
of configUpload and contains a superset of the information provided when
-local is not specified.
Displays the entire contents of a configuration file that was previously created
by configUpload and stored on an attached USB device. The output can be
optionally filtered by -pattern "pattern". If file is omitted, the command
prompts you to specify a file name. The output format when -local is specified
matches that of configUpload and contains a superset of the information
provided when -local is not specified.
switch:admin> configlist -local
config.txt
switch :admin> configshow -local
File Name [config.txt]: config.txt
[Switch cp7 Configuration uploaded on Aug 07 03:59:55]
[FOS-Version: 6.0.0.0]
92067 2007 Aug 07 03:59
2
configShow
85