Zoneobjectcopy - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

zoneObjectCopy

zoneObjectCopy
Copies a zone object.
Synopsis zoneObjectCopy "objectName", "newName"
Description Use this command to make a copy of an existing zone object and give it a new name. The resulting
object is of the same type as the original object. You can use this command for all zone object
types, including cfg, zone, and alias.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Note When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operands are required:
"objectName"
"newName"
A zone configuration name must begin with a letter followed by any number of letters, numbers,
and underscores. Names are case-sensitive. For example, "Cfg_1" and "cfg_1" are different zone
configurations. Blank spaces are ignored.
Refer to the zoneCreate command for more information on name and member specifications
Examples To create a configuration containing three zones:
See Also cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow,
zoneObjectRename
712
The name of the object that you want to copy. Quotation marks are optional.
The name of the object that you want created. Quotation marks are optional.
switch:admin> cfgshow "*"
cfg: USA_cfg
switch:admin> zoneobjectcopy "USA_cfg", "UK_cfg"
switch:admin> cfgshow "*"
cfg: UK_cfg
cfg: USA_cfg
Red_zone; White_zone; Blue_zone
Red_zone; White_zone; Blue_zone
Red_zone; White_zone; Blue_zone
Fabric OS Command Reference
53-1000599-02