Ficonshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

ficonShow

Displays the contents of the specified FICON database.
Synopsis ficonshow database [fabric]
where database is one of the following:
ficonshow RNID [fabric]
ficonshow LIRR [fabric]
ficonshow SwitchRNID [fabric]
ficonshow RLIR [fabric]
ficonshow ILIR [fabric]
Description Use this command to display the contents of a FICON database. The ficonShow database operand
is the name of the database to display. If the fabric operand is absent, the command displays the
members of the named database that are local to the switch on which the command was issued. If
the fabric operand is present, it must be entered exactly as shown, and this specifies that all
members are displayed, both local and remote.
The following information might be displayed, depending on which database you enter and which
operands you use with the command:
Domain
Fabric WWN
Flag
Fmt
FRU Failure Description
Fabric OS Command Reference
53-1000599-02
Displays the domain ID.
Displays the fabric WWN.
Indicates if the node is valid, not valid, or not current. Flag values are as
follows:
0x00 Indicates the node ID of the storage port for RNID switch for SwitchRNID is
valid.
0x10 Indicates the node ID of the channel port is valid.
0x20 Indicates the node ID of the storage port is not current.
0x30 Indicates the node ID of the channel port is not current.
0x40 Indicates the node ID of the storage port for the RNID switch for RLIR is not
valid.
0x50 Indicates the node ID of the channel port is not valid.
Displays the record-registration format.
Indicates the FRU failure type as one of the following:
WWN card [unit number]
The WWN card.
Power Supply [unit number]
The Power Supply card.
Hardware Slot [unit number]
The Hardware Slot.
2
ficonShow
197